Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Other

$10.99 - $15.99
Our Seatpost Adapters quite literally fill the gap, and with over 25 sizes available, the combinations are endless. These Seatpost Adapters are compatible with static, suspension and dropper Seatposts.
$19.50 - $26.50
Mounting hardware fits a variety of Cane Creek shocks.
$10.99
Thudbuster G4 ST Elastomer Capsule - 70A from Cane Creek.
$49.00
Slamset top headsets are designed to keep the stack height low. - Hellbender bearings with improved seal structure
$13.99
Elastomers are designed for use with eeSilk or eeSilk+ seatposts, featuring different durometers that provide different levels of comfort. - Cane Creek eeSilk+ Elastomer 3 - 50 Durometer, Soft
$9.99
Crown races for Cane Creek headsets fit a variety of lowers and crown race seat diameters. - Compatible with 10-, 40- and 110-Series headsets and backwards compatible with S and XX Series - Integral mold seals keep out the elements - Compatible with 41 and 42mm lower headset bearings - Compatible with 30mm (1-1/8") straight steerer tubes - Durable steel construction
$12.99
Crown races for Cane Creek headsets fit a variety of lowers and crown race seat diameters. - Compatible with 10-, 40- and 110-Series headsets and backwards compatible with S and XX Series - Integral mold seals keep out the elements - Compatible with 52mm lower headset bearings - Compatible with 30mm (1-1/8") straight steerer tubes - Durable steel construction - Allows the installation of a straight steerer fork without changing out the headset lower
$29.99
ViscoSet offers viscous damping to make bicycles safer by inhibiting the uncontrolled steering oscillation known as speed wobble. Speed wobbles are vibrations that start small and get worse due to harmonics. This frightening shimmy can affect the handling of any bicycle under certain conditions and is the result of many different factors.
$16.99
Replacement inserts for Thudbuster G4 suspension seatposts. - Cane Creek LT G4 Elastomer Insert - Medium
$1.00
Shim spacers can be placed between bearing and compression cover in IS headsets to fine tune the fitment.
$9.99
Allows the use of VALT springs with Fox coil shocks.
$79.99
A higher quality spring greatly improves the performance of your coil shock. VALT springs from Cane Creek are much lighter than traditional steel springs while pushing the boundaries of performance and durability. - Inner diameter of 36.5mm is compatible with all Cane Creek coil shocks - Also compatible with Manitou, Marzocchi, XFusion, ELKA/MRP, BOS and DSP - Compatible with Fox coil shocks with required spring clip adaptor
$13.99
Elastomers are designed for use with eeSilk or eeSilk+ seatposts, featuring different durometers that provide different levels of comfort. - Cane Creek eeSilk+ Elastomer 7 - 70 Durometer, Firm
$17.99
40-Series Bearing - Compatible with 110-, 40-, and 10-Series headsets
$12.99
Elastomers are designed for use with eeSilk or eeSilk+ seatposts, featuring different durometers that provide different levels of comfort. - Cane Creek eeSilk Elastomer 7 - 70 Durometer, Firm
$4.99
Replacement inserts for Thudbuster G4 suspension seatposts. - Cane Creek ST G4 Elastomer Insert -Medium
$13.99
110-Series Alloy Interlok Headset Spacer - Aluminum construction
$16.99
Replacement inserts for Thudbuster G4 suspension seatposts. - Cane Creek LT G4 Elastomer Insert -Soft
$12.99
Crown races for Cane Creek headsets fit a variety of lowers and crown race seat diameters. - Compatible with 10-, 40- and 110-Series headsets and backwards compatible with S and XX Series - Integral mold seals keep out the elements - Compatible with 52mm lower headset bearings - Compatible with 30mm (1-1/8") straight steerer tubes - Lightweight aluminum construction - Allows the installation of a straight steerer fork without changing out the headset lower
$79.99
The performance of your shock is directly related to the quality of your spring. VALT springs offer a significant weight reduction over standard steel springs. Riders can enjoy the performance benefits of coil shocks without the weight penalty.
$42.99
HELM Coil - Main Spring - 45lbs/in from Cane Creek.
$16.99
Replacement inserts for Thudbuster G4 suspension seatposts. - Cane Creek LT G4 Elastomer Insert - X-Firm
$13.99
Elastomers are designed for use with eeSilk or eeSilk+ seatposts, featuring different durometers that provide different levels of comfort. - Cane Creek eeSilk+ Elastomer 9 - 80 Durometer, X-Firm
$9.99
Travel reduction clips for Cane Creek suspension forks. - Cane Creek Helm Air Travel Reduction Clips, Set of Two 10mm Clips
$99.99
Cane Creek Progressive Rate VALT coil springs are designed to provide riders with a true rise-in-rate spring curve. - Springs feature the progressiveness and ramp-up that hard-charging riders demand - Designed for use with Cane Creek Coil shocks - Progression begins at 50% into the stroke of the spring - Crafted from high-performance spring steel - Inner diameter of 36.5mm is compatible with all Cane Creek coil shocks
$22.99
40-Series Bearing - Compatible with 110-, 40-, and 10-Series headsets
$18.99
Protects Cane Creek Thudbuster moving parts from grit and grime. - Neoprene construction
$79.99
A higher quality spring greatly improves the performance of your coil shock. VALT springs from Cane Creek are much lighter than traditional steel springs while pushing the boundaries of performance and durability. - Inner diameter of 36.5mm is compatible with all Cane Creek coil shocks - Also compatible with Manitou, Marzocchi, XFusion, ELKA/MRP, BOS and DSP - Compatible with Fox coil shocks with required spring clip adaptor
$19.99
Air Spring Volume Reduction Kit - Cane Creek Kitsuma 5mm Air Stroke/Volume Reducer
$4.99
Replacement inserts for Thudbuster G4 suspension seatposts. - Cane Creek ST G4 Elastomer Insert -Soft
$5.99
Compression ring fits above the upper bearing in a Cane Creek headset to ensure vertical and horizontal compression is optimal. - Compatible with 41mm and 42mm OD upper bearings
$7.99
Replacement elastomers for Thudbuster LT suspension seatposts allow the rider to tune for weight.
$12.00
Crown races for Cane Creek headsets fit a variety of lowers and crown race seat diameters. - Compatible with 10-, 40- and 110-Series headsets and backwards compatible with S and XX Series - Integral mold seals keep out the elements - Compatible with 52mm lower headset bearings - Compatible with 40mm (1-1/2") tapered steerer tubes - Lightweight aluminum construction
$13.99
eeSilk Stem elastomers were developed based on rider preference and varying surfaces. Each eeSilk Stem includes 3 elastomers varying in firmness depending on stem length. We recommend first riding the elastomer that comes installed with the stem to form a baseline. Then change to a softer or firmer elastomer based on preference for more or less compliance.
$9.99
Crown races for Cane Creek headsets fit a variety of lowers and crown race seat diameters. - Compatible with 10-, 40- and 110-Series headsets and backwards compatible with S and XX Series - Integral mold seals keep out the elements - Compatible with 38mm lower headset bearings - Compatible with 26.4mm (1") straight steerer tubes - Durable steel construction
$22.99
Cane Creek crown races are interchangeable between headset series.
$9.99
IS47-IS41 Headset Converter
$12.99
Crown races for Cane Creek headsets fit a variety of lowers and crown race seat diameters. - Compatible with 10-, 40- and 110-Series headsets and backwards compatible with S and XX Series - Integral mold seals keep out the elements - Compatible with 41 and 42mm lower headset bearings - Compatible with 30mm (1-1/8") straight steerer tubes - Lightweight aluminum construction
$12.99
Elastomers are designed for use with eeSilk or eeSilk+ seatposts, featuring different durometers that provide different levels of comfort. - Cane Creek eeSilk Elastomer 9 - 80 Durometer, X-Firm
$11.99
Cane Creek ZN40-Bearing 41.8mm 45 x 45 Zinc, Each from Cane Creek.
$16.99
Replacement inserts for Thudbuster G4 suspension seatposts. - Cane Creek LT G4 Elastomer Insert - Firm
$2.99
Air Spring Volume Reduction Kit - Cane Creel Kitsuma Air 1250^3 Negative Volume Reducer
$99.99
Cane Creek Progressive Rate VALT coil springs are designed to provide riders with a true rise-in-rate spring curve. - Springs feature the progressiveness and ramp-up that hard-charging riders demand - Designed for use with Cane Creek Coil shocks - Progression begins at 50% into the stroke of the spring - Crafted from high-performance spring steel - Inner diameter of 36.5mm is compatible with all Cane Creek coil shocks
$10.99
Replacement seals for servicing Cane Creek rear shocks.
$24.99
Replacement clamp kit for Thudbuster G4.
$13.99
Cane Creek crown races are interchangeable between headset series. - Required to fit RockShox Bluto on SM and MD Beargrease Carbon frames - May be required to fit Manitou Mastodon Mukluk Carbon frames
$10.50 - $11.00
- Color-matched aluminum Interlok Spacer for Cane Creek headsets
$24.00
Hellbender bearings have an improved seal structure and are cross compatible with Cane Creek headsets.
$12.99
Crown races for Cane Creek headsets fit a variety of lowers and crown race seat diameters. - Compatible with 10-, 40- and 110-Series headsets and backwards compatible with S and XX Series - Integral mold seals keep out the elements
$38.19
Chrome housing end caps are durable and shiny. - Bottle of 100
$9.99
Replacement cover for HELM/HELM MKII Negative Air Charge cover
$79.99
A higher quality spring greatly improves the performance of your coil shock. VALT springs from Cane Creek are much lighter than traditional steel springs while pushing the boundaries of performance and durability. - Inner diameter of 36.5mm is compatible with all Cane Creek coil shocks - Also compatible with Manitou, Marzocchi, XFusion, ELKA/MRP, BOS and DSP - Compatible with Fox coil shocks with required spring clip adaptor
$12.99
Elastomers are designed for use with eeSilk or eeSilk+ seatposts, featuring different durometers that provide different levels of comfort. - Cane Creek eeSilk Elastomer 3 - 50 Durometer, Soft
$11.99
40-Series Bearing - Compatible with 110-, 40-, and 10-Series headsets
$39.99
Rebuild kits come with everything you need to service moving parts on a Cane Creek Thudbuster suspension seatpost.
$6.99
Replacement bushings for Cane Creek shocks.
$23.99
Replacement seals for servicing Cane Creek rear shocks.
$7.99
Replacement elastomers for Thudbuster LT suspension seatposts allow the rider to tune for weight.
Page 1 of 2 Next page