Shop Gear

3T's ARX II Team stem is the perfect finishing touch. It's made of aluminum for light weight, durability, and excellent stiffness. Refined shaping of the clamping areas results in outstanding stress distribution on the bars and steerer for safety. Plus, it features 3T's secure aluminum 4-bolt faceplate. - Aluminum stem with 40mm stack height - Single M6 bolt clamps stem to fork steerer - T25 bolts on bar clamp - 120 grams for 110mm - Bar Clamp Diameter: 31.8 mm - S.H.I.S. Stem Clamp Diameter: 28.6mm - Weight: 120 grams (110mm)

- The original third-Eye eyeglass mirror design - Shatter-Proof aluminized glass mirror, Resists discoloration - Mounts to left or right sun/Eyeglass temple-Arm - Rubber-Tipped outer prongs provide a no-Slip mount

- Aheadset preload adjusting bolt

Attach your IS Mount disc brake brackets with premium SRAM mounting bolts. These bolts are made from stainless steel for a lifetime of use and come with thread-locking compound already applied.

Bolt on Avid's 20R Brake Pads for consistent, powerful braking. They're designed for use with linear-pull brakes.

Keep your brakes performing at their best with Avid's Assembly Grease. They're compatible with all Avid disc brake seals. You'll get a 1-ounce jar of grease.

Avid makes it easy to get a perfectly set up brake with their innovative CPS Hardware Kit. Each kit features a series of washers that make it easy to set up your brake. Step 1: Install the bolts and washers loosely so the caliper can move. Step 2: Squeeze the brake lever. Step 3: Tighten the bolts. It's that simple to get a rub-free setup! This kit includes stainless steel hardware with washers and bolts for both CPS (Caliper Positioning System) mounting and standard (direct-mount)mounting.

To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

Avid's Front 180mm/Rear 160mm Post Bracket Hardware Kithas everything you need to mount a front 180mm or a rear 160mm rotor (sold separately) to your bike.

Avid, Post Bracket, Includes Stainless Caliper Mounting Bolts (CPS and Standard)

Avid, Post Bracket, Includes Stainless Caliper Mounting Bolts (CPS and Standard)

Smooth, controlled braking is yours with Avid's G2 CleanSweep Rotor. It utilizes cross-drilled technology to dissipate heat and cut weight, giving you a consistent feel at the lever and predictable speed control in all conditions.

A neoprene pogie designed to work with flat or riser style handlebars to keep hands warm when encountering the cold, wind, rain and/or snow. - Waterproof, 5mm neoprene construction with nylon lamination inside and outside - Attaches to handlebars - can be easily installed and removed for temperature changes - Can be used with regular cycling gloves of varying thickness - Reflective material on seam and logo - Stays open, allowing easy access and removal of hands - Vent zipper can be opened if hands start to overheat - Measures 10" wide by shifters/brakes

- Includes mounting kit, extra tube for bags, spring clamp, fastening option for light (80mm) - MIK profiles, comp. with (MIK) accessories - Max. 30kg, 10mm

- Waterproof (IPX3) - Elastic cord ontop and mesh side pockets - Removable and adjustable shoulder strap - Waterproof lining with roll top - Fastening: 4 straps at bottom - Compatible: MIK system

The Ultimate Drink Holder! ABC – ANY BOTTLE CAGE! Fits almost any bottle, cup, or container 2 1/4" to 4 3/4". Turn knob to tighten and turn to loosen. Crank it down so drink won't come out or set to desired interference fit for easy in or easy out. - Handlebar, frame, and seat post adapters available.

Squatch platform pedals have a low-profile, nylon construction and molded traction studs that are easier on the shin in the event of a crash or pedal slip. - EPB bearing system - Spindle size: 9/16-inch

- Designed for linear pull & mechanical disc brakes - Aluminum construction - 2.5 finger - 22.2mm (7/8-inch) clamp - Left/Right: Right - Reach adjust and return spring - 88g each

Forged alloy platform pedals with a hardened chromoly spindle. - Molded pins - Size: 9/16-inch

The Nylo-Form pedals feature a low-profile, durable composite construction. - CrMo axle - Sealed bearings - Molded pins - Spindle size: 9/16-inch

Designed to conform to the center channel and bead locking rim bed, Boyd tubeless tape creates an air-tight seal between the tire and rim bed. - Not as stiff as a lot of the other options, which makes installation a breeze!

Designed to conform to the center channel and bead locking rim bed, Boyd tubeless tape creates an air-tight seal between the tire and rim bed. - Not as stiff as a lot of the other options, which makes installation a breeze!

- Rim shape, width, and depth designed for the modern disc brake bike - Perfect, high performance all rounder set for mixed terrains, speeds and road conditions. - Hooked rim means you can run any tire, any pressure without risk of tire blowoff

- Versatile tread pattern suitable for a broad range of conditions - Medium-height center knobs are ramped to reduce rolling resistance and are staggered to provide a consistent feel across the profile of the tire - Side knobs are fairly aggressive and provide excellent cornering grip - Available with a wire bead or folding bead with EPS puncture protection

Crown races for Cane Creek headsets fit a variety of lowers and crown race seat diameters. - Compatible with 10-, 40- and 110-Series headsets and backwards compatible with S and XX Series - Integral mold seals keep out the elements - Compatible with 52mm lower headset bearings - Compatible with 40mm (1-1/2") tapered steerer tubes - Lightweight aluminum construction

Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 110 headsets. • Technical Description: EC44/40/H12/x • Bottom Type: EC - External Cup • Bottom Head Tube Inside Dia.: 44.00mm • Crown Race Seat Dia.: 39.76mm • Crown Race Type: Aluminum, Dual-Seal • Bottom Stack Height: 12mm • Bottom Bearing Type: Top-quality, sealed stainless steel bearings • Material: 7075 aluminum • Weight: 61.02g

Wheel magnet for all CatEye cycle computers

The sleek and ultralight BM-45 bar end mirror easily attaches to drop and flat bars, making it perfect for all bikes. Constructed of aluminum and glass for durability and nearly distortion-free viewing, the BM-45 represents the height of handlebar mirror construction and design. Minimal projection from the bar means never having to sacrifice clean aesthetics for critical rear-view safety again.

From the downhill mountain biker to the farsighted cyclists, the Padrone is ideal for anyone who wants to enjoy a squint-free ride and a fast, simple set-up. - Analog wireless - Large display and sleek design - Auto start/stop - Menu screen to change setting - ClickTec button interface - Programmable odometer - Battery indicator - FlexTight universal bracket

Eurostyle Chamois Butt’r is the most popular chamois cream for cyclists who prefer a soothing cooling formula. It's the lube of choice for many top men and women pro riders. It's a non-greasy skin lubricant that improves your riding comfort by preventing rubbing and chafing. It's safe for use on even the most delicate fabrics and it washes right off the skin and out of shorts easily with soap and water. And, it also helps extend the life of your cycling shorts by restoring the softness and suppleness of both natural and synthetic chamois pads. The single-use packets are just right for taking along on rides or events or giving to friends who need more comfort. The tube or jar is the perfect size for your drawer or gear bag and offers many applications.

Her' Chamois Butt’r was developed by a female sports medicine physician in cooperation with professional women cyclists. It's a non-greasy skin lubricant that improves your riding comfort by preventing rubbing and chafing. Her' utilizes premium ingredients including aloe vera, green tea leaf extract, tea tree oil, shea butter and lavender oil for their naturally occurring beneficial properties. It's safe for use on even the most delicate fabrics and it washes right off the skin and out of shorts easily with soap and water. - To use: rub 1/6 to 1/3 ounce on your skin or chamois - No gluten, paraben, fragrance or artificial color - Meets the FDA’s Good Manufacturing Practices - No animal testing utilized

Chamois Butt’r Original is a non-greasy skin lubricant developed by cyclists for use with all chamois. Chamois Butt’r isn’t just for cyclists! It lubricates, soothes, and softens the skin of all athletes who experience chafing. BENEFITS: - No greasy residue - Immediately improves comfort - Soothes already chafed or irritated skin - Rinses out of clothing and off of skin easily - Won’t damage or discolor technical clothing - No parabens, phthalates, gluten or artificial fragrances - To use: rub 1/6 to 1/3 ounce on your skin or chamois - Meets the FDA’s Good Manufacturing Practices - No animal testing utilized

CLIF BLOKS Energy Chews provide quick, chewable, energy to athletes while training and racing. BLOKS come in 33 calorie cubes, with sleek and portable packaging, making it easy to customize and track caloric and electrolyte intake during long outings and races.

- 11" long x 7.75" wide - Multi-stage foam - Anatomic relief design - Elastomer spring suspension

Cloud 9's Ladies' Sport Select Seat is narrow in the middle making it ideal for pedaling comfort. And it boasts gel foam padding and a cutout and relieved tail for sweet cushioning, pressure-elimination and cooling. Plus, for durability, this sweet seat is reinforced on the front and rear.

Cloud 9's Men's Sport Select Seat is narrow in the middle making it ideal for pedaling comfort. And it boasts gel foam padding and a cutout and relieved tail for sweet cushioning, pressure-elimination and cooling. Plus, for durability, this sweet seat is reinforced on the front and rear.

- Gel foam material - Anatomic relief design - Heavy-duty tri-stitched cover - Coil & web spring suspension - Corner abrasion guards - Steel wire rail system - Dimensions: 10.5 x 9-inch

Continental's Gatorskin Folding combines 3 flat-protection technologies into one fast-riding, high-mileage racing and training tire. It features a super-fine 180 thread-per-inch casing, a bead-to-bead layer of DuraSkin, and is finished with a Kevlar-reinforced top layer. The result is a tire with a lightweight folding bead that rolls and corners with the best of them while providing flat protection second to none. - DuraSkin sidewall protection - PolyX puncture protection - Weight: 220/240/320/325 grams (23c/25c/28c/32c)

Continental's Gatorskin is a super long-wearing and reliable tire that's fast and great handling, too. It features a supple 180-thread-per-inch casing, a bead-to-bead layer of DuraSkin, and a Kevlar-reinforced top layer. The result is a lightweight tire that rolls and corners with the best of them while providing flat protection and durability second to none.

Whether on the road, on gravel or on forest paths – this all-rounder is a perfectly equipped touring tyre. Due to the pronounced centre tread, the tyre has excellent rolling characteristics and brings frequent riders quickly from A to B. The bionically designed and laminated shoulder provides good support and guarantees a safe cornering. Best Continental Racing Bike technology for touring bikers. Whether on the road, on gravel or on forest paths, this all-rounder provides maximum protection against punctures, thanks to Vectran Breaker.

Handmade in Germany, the Top Contact II Reflex is perfect for touring bikes and commuting steeds. Its smooth center rolls fast and the tread pattern on the shoulders maximizes cornering traction. The Top Contact II also utilizes Continental's Vectran technology, a polymer membrane that offers excellent puncture protection and reduces rolling resistance. This fine tire also sports Continental's Reflex sidewall striping for increased visibility at night.

The Grand Prix 5000 is the best all-rounder in the field, brought to a whole new performance level. Ride faster, more comfortably, and with increased puncture protection. Its Active Comfort Technology absorbs vibrations and smooths your ride. Lazer Grip technology, designed to make you one with the road, features a lasered micro profile structure that expands over the tire’s shoulder and provides outstanding cornering. The Vectran Breaker is lighter, more flexible and protects more effectively against cuts than comparable nylon. With incredible tear resistance at a very low weight, it possesses exactly the right properties to be a premium puncture protection insert, while not adversely affecting rolling resistance. The Grand Prix 5000—made to make you better. With Continental's unique and legendary BlackChili tread compound, produced only in Germany, they have revolutionized the sport of cycling. This compound answers the eternal question of the best balance of grip and rolling resistance for cycling. Regular test wins confirm the measurable and noticeable advantages for cyclists, established in both the lab and on the road. The latest polymers, as well as specially developed carbon black particles and filler materials, guarantee ultimate performance.

The Grand Prix 5000 S Tubeless Ready allrounder tires are lighter, faster and supported with stronger sidewalls, compared to previous GP5000 versions. Designed to be compatible with hooked and hookless rims, this new standard in road tubeless ready technology will allow you to ride faster, more comfortable and with increased puncture protection. - Hookless rim compatible up to 73 PSI / 5 bars - The tubeless ready (TR) carcass construction is robust and impervious against damage and penetration from foreign objects. The result: versatile, low weight and an attractive design. In addition, tires made using this technology can also be used as Tubeless or with an inner tube - Vectran Breaker is a synthetically manufactured high-tech fiber with an enormous tear resistance at a very low weight: Exactly the right properties to process into a premium Continental bicycle tire as a puncture protection insert - Active Comfort Technology absorbs vibrations and smoothens your ride - Lazer Grip, to make you one with the road. The lazered micro profile structure expands over the tire’s shoulder and provides outstanding cornering - BlackChili Compound provides the best balance of grip and rolling resistance for cycling

The ultimate trailside companion. This high-tensile steel multi-tool features a precise fit and finish and side grips for a secure handhold even with gloves on. The M5 includes: Hex wrenches: #3, 4, 5, 6 Screwdrivers: Phillips #2 Length: 89mm Weight: 85g Warranty: Lifetime

The ultimate trail-side companion. Details - 13 high tensile steel multi-tools, including an integrated tire plug tool - Tire plugs come included with a storage case that mounts directly to the tool - The case can be used to conveniently store chain links Specs - Hex Wrenches: #2, 2.5, 3, 4, 5, 6, 8 - Length: 89mm - Screw Drivers: Phillips #1 & #2, flat #1 - Specialty Tools: Tire plug tool, tire plugs - Torx: T-10, T-25 - Warranty: Lifetime - Weight: 164g

Crank Brothers' Premium MTB Cleats are perfect for your Crank Brothers Eggbeater, Candy, Acid, Smarty, Mallet, and Quattro pedals. They're made from solid brass for crisp entry and exit, and top-notch durability. - SPD compatibility - Weight (pair): 30g - Float: 6 degrees - Release angle: 15 or 20 degrees

The ultimate trailside companion. These high tensile steel multi-tools feature a precise fit and finish and side grips for a secure handhold even with gloves on. The m17 includes: Chain tool: 8/9/10 speed compatible Spoke wrench: #0, 1, 2, 3 Hex wrenches: #2, 2.5, 3, 4, 5, 6, 8 Open wrench: 8mm, 10mm Screwdrivers: Phillips #2, flat #2 Torx: t-25 Length: 89 mm Weight: 168g Warranty: Lifetime

Crank Brothers' most versatile pedal. The Candy excels at it all – cyclocross, XC, trail, all mountain. 4-sided entry enables superior mud-shedding capability, and customizable float and release angles create a dialed-in feel. - Spindle material: Forged scm 435 chromoly steel - Body material: One piece composite - Wing material: Stamped steel - Spring material: 300 series stainless steel - Release angle: 15° / 20° - Q-factor: 52mm - Inner bearing type: Igus LL-glide bearing - Outer bearing type: Enduro cartridge bearing - Cleat: Premium brass cleats with shims included - Weight: 294g per pair - Warranty: 5 years

Crank Brothers' most versatile pedal. The Candy excels at it all—cyclocross, XC, trail, and all mountain. 4-sided entry enables superior mud-shedding capability, and customizable float and release angles create a dialed-in feel. Specs: - Spindle material: Forged scm 435 chromoly steel - Body material: 6061-T6 aluminum - Wing material: Stamped steel - Spring material: 300 series stainless steel - Release angle: 15° / 20° - Q-factor: 52mm - Inner bearing type: Igus LL-glide bearing - Outer bearing type: Enduro cartridge bearing - Cleat: Premium brass cleats with shims included - Weight: 355g per pair - Warranty: 5 years

Crank Brothers' Candy 3 pedals combine 4-sided cages for super-easy entry/exit with CNC'd aluminum platforms for low weight, great foot stability, and on-trail durability. The Candy 3s feature chromoly axles, stainless steel springs, CNC machined aluminum wings, and an open design that sheds mud fast, making them ideal for sloppy conditions and cyclocross. They're also enhanced with inner needle bearings and water-tight internals for consistently smooth pedaling.

The ultimate pedal for enduro riding and racing, with a longer spindle. - Concave platform for secure foothold - 6 adjustable pins per side for grip - Integrated traction pad technology to optimize the shoe/pedal interface - Ribbed body for better traction when unclipped - Chamfered edges to reduce rock-strikes - 57mm q-factor for increased shoe clearance and control - 4-sided entry / superior mud shedding - Customizable float & release angle - Premium bearings & double seal system - Adjustable Pins: 6 per side - Body Material: 6061-T6 aluminum - Cleats: Premium brass cleats with shims included - Endcap: Hex alloy - Inner Bearing Type: Igus LL-glide bearing - Max Rider Weight: No restriction - Outer Bearing Type: Enduro cartridge bearing - Q-factor: 57mm - Release Angle: 15° / 20° - Spindle Material: Forged scm 435 chromoly steel - Spring Material: 300 series stainless steel - Warranty: 5 years - Weight: 424g per pair - Wing Material: 17-4PH stainless

CushCore is an engineered foam insert to be mounted inside a tire, designed to absorb impacts, reduce vibration, and increase lateral stability. These characteristics translate to a more controlled, comfortable, and faster ride. - The system is designed to be used with tubeless-ready or tubeless converted rims and tires and is compatible with tubeless tire sealants - The insert divides the inner volume of the tire in half, maintaining air underneath the tread and the foam insert next to the rim - Fits tire widths 1.8" to 2.4" and inner rim widths 22mm to 32mm Includes - 1 CushCore Insert - 1 CushCore Tubeless Air Valve - Installation Instructions

Packed in a sleek profile that complements your road bike, the Hotrod 50™ unleashes a powerful 50 lumens of radiant wide coverage. Its 6 attention grabbing modes keep motorists aware of your presence any time you’re on the road. Its Versatite™ flexible mount lets you attach the Hotrod 50™ tail light to most seat posts and seat stays, including aero styles. Performance - Powerful 50 lumens flashing - Low profile, compact size - USB rechargeable Li-ion battery - Low battery indicator - Water-resistant design - 1:30 ~ 100 hr run time - System Weight: 29g Technology and Safety - 6 modes: High Flash - SteadyPulse® - Zoom - Group - Low Flash - High Steady - SteadyPulse's steady beam helps motorists better gauge their distance from you while the overlapping pulses keep them alert of your presence - Sturdy and flexible Versatite™ mount attaches to most seat posts and seat stays, including aero styles Patent pending. *Features and specs are subject to change without notice.

Sporting an aggressive new design and the most powerful single LED taillight available, the Hotshot Pro™ 150 is engineered from the ground up to stand out in the brightest of daytime hours and at night with intense 150 lumen flashes. Exclusive 2 button design lets you fully adjust the tempo of each flash mode to maximize motorist awareness. Every bit the road cyclist’s tail light, its extra-wide beam lens maximizes your presence from afar and a specially treated internal body disperses a radiant glow to keep nearby motorists alert. Get the most out of your ride with up to 210 hours of run time. (patent pending) - Powerful and efficient single LED blasts 150 lumen flashes (90 lm steady) - Engineered to make you stand out in broad daylight and at night - Built-in 24/7 Safety Technology® gives you a powerful selection of 6 day and night modes (Steady - Zoom - SteadyPulse® - Triple Flash - DayLightning® - Random Flash) - Freely adjust the brightness of Steady mode and the flash tempo of the flashing modes with the simple 2 button interface (patent pending) - SteadyPulse® mode features a steady beam to help motorists gauge their distance while overlapping pulses keeps them alert at night - DayLightning® mode emits lightning-like flashes to highlight your presence in the brightest of daytime hours - Zoom mode signals those around you with gentle changes in brightness - Enhanced Cycling Optics™ expands your presence with an extra-wide and long-range beam - Specially treated internal body disperses a radiant glow to keep nearby motorists alert - USB rechargeable internal battery - Low battery indicator - Light mode memory saves the mode you're in before the light is turned off - Compact, water-resistant design weighs only 59 grams - Seat post and seat stay mounts included - 2 ~ 210 hours of run time Patent pending. *Features and specs are subject to change without notice.

Service your DT Swiss star ratchet hubs and wheels with DT Swiss Ratchet and Kits. - DT Swiss Service Kit - 3-Pawl

Bearings for maintaining and rebuilding DT Swiss hubs. - DT Swiss 6802 Bearing

Replacement axles for DT Swiss hubs.

Aluminum